Never empty your STATIM condenser bottle again!
Helps prevent mold, mildew, rot and rust caused by spills and humid environments created by exhaust from condenser bottles.
Prevents autoclave wastewater from damaging plumbing. Built-in backflow prevention meets or exceeds local plumbing codes..
Eliminates the need for office staff to empty hot water bottles manually.
The innovative design of the new VistaCool 3 provides all the same benefits as its predecessors, while occupying less space. The system’s included mounting clips and pressurized drain line enable it to be installed vertically or horizontally in almost any location.
SciCan VistaCool Sophisticated wax motor allows cold water into the system ONLY when the sterilizer is in use.
VistaCool will work with the STATIM 2000 or 5000 and other select sterilizers.
System will continuously cool your STATIM’s hot exhaust and drain it safely – no matter how many cycles you run.
VistaCool is the only direct-to-drain product designed to safely and effectively drain the steam exhaust from a STATIM 2000 or 5000 and other select sterilizers.
Can be used with all drainage pipe material types.
Water tank is made of recycled plastic material.
|EASY TO USE
No consumable parts and no daily maintenance is required.
Over the last 20 years, the STATIM cassette autoclave is one of the quintessential innovations in sterilization technology and enjoys leadership in the body art, dental and ophthalmology markets in over 90 countries. Designed to sterilize in a fraction of the time compared to traditional autoclaves, the STATIM reduced the quantity of expensive instruments needed.
To enhance the STATIM functionality, SciCan is proud to introduce the latest innovation to the STATIM brand: the VistaCool. The VistaCool is a direct-to-drain system whereby the STATIM is connected directly to the office or clinic plumbing. What this means is, rather than the STATIM unit draining into the external drainage bottle, the STATIM can now vent the used sterilization water directly down the main office drain.
There are many benefits of venting the STATIM unit directly down the drain, most notably saving time and increasing office efficiency. The VistaCool will save time, as a staff person will no longer be responsible for regularly emptying the bottle.
The VistaCool uses cold city water to cool the steam quickly and efficiently. The thermal sensor only activates when the system is in use, so water is only used when it’s needed. The built-in safety feature prevents the system from overheating and damaging office cabinetry.
|Tank Material||Polyethylene – Gray||Gray ABS Tank, PVC End Caps|
|Tank Dimensions||10.75" W x 5.75" L x 13.75" H||4.0" W x 13.0" L x 17.0" H||3.5" Diameter x 15.0" L|
|Tank Volume||1.50 Gallons / 5.70 Liters||3.00 Gallons / 11.40 Liters||0.37 Gallons / 1.40 Liters|
|Tank Weight (w/ water & Fittings)||15.0 lbs. / 6.8 kg||28.0 lbs. / 12.7 kg||5.0 lbs. / 2.3 kg|
|Coolant Water Connection||Supply fittings for 1/4" O.D. feed tubing included.|
|Drain/Wastewater Connection||Drain tee with fittings included.||Not included.|
|Max Coolant Water Pressure||100 psi / 6.9 bar|
|Max Altitude (If using Air Gap)||6,561 feet / 2000 meters|
Infection control products and practices
Sterilization and equipment maintenance
-STATIM autoclave work practices
-HYDRIM automatic instrument washer work practices
Jewelry safety standards
-Finishing and customizing jewelry
--Anodizing: passivating and coloring titanium and niobium
The Statim 2000 autoclave is the cornerstone of our body piercing sterilization. I am the manager and main piercer at our studio so my day can be very hectic trying to juggle both positions at the same time. With our Statim I can cut out the time it would take to pre-package and process all tools and jewelry. Not to mention the amount of waste that is accumulated in gloves and packaging by undertaking such an arduous and time consuming task. There are no expired packs that need to be reprocessed, and jewelry stock takes up a lot less space!
It is impressive and reassuring to our clients to see their entire piercing setup packed and run (with a pass/fail sterilization integrator) in front of them. While the six minute cycle is running I have time to discuss any concerns my clients may have as well as give them detailed aftercare instructions. The best part is the ability to transport the entire procedure setup to the piercing room in a sealed cassette that opens, once again, in front of the client.
I love — honestly love — my Statim and am currently considering getting a Statim tattooed on my body!
Brian W Skellie
Owner & Piercer
Brian founded Piercing Experience in 1992 as a piercer inspired to research and evolve safe body modification and share the results with the community. Apart from work as a dealer for infection control products, he is an educator who has presented many seminars and workshops at conferences in North and South America and Europe. He is a frequent APP contributor ever since the first conference, an active business member since 1996, former editor of The Point Journal, completed three terms as a Board member as Treasurer, International Liaison and President, and commenced his fourth term as Medical director in 2017.
Brian celebrates over 25 years of sharing his body art expertise with his clients, colleagues and friends. He specializes in body piercing, safety standards, STATIM autoclaves and HYDRIM automated instrument washers, and is an authorized dealer for the SciCan family of products. He offers expert consultation and training for streamlined workflow for Body Art Professionals. As a long time member of ASTM International and the APP, he develops, interprets and publishes evidence based standards for continual improvement in the field of Body Arts.